Tag Archives: gear s

China S Series Hollow Shaft Helical Worm Gear Box with IEC Motor manufacturer

Item Description

 

Solution Description

 

Solution Description

-S Collection Helical gearbox
 

 

Solution Functions
one.Higher modular design.
two.Integrated casting housing,compact dimension,large loading assist, stable transmitting and low sounds level.
three.With the specific gear geometry, it receives large torque, effectiveness and lengthy life circle.
4.It can obtain the direct blend for 2 sets of gearbox.
5.Large performance and preserve electricity.

6.Conserve value and reduced maintenance.

 

Item Parameters

one. Technical data

Size 38 forty eight 58 sixty eight seventy eight 88 ninety eight
Construction BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) .eighteen~.75 .18~1.five .eighteen~3 .twenty five~5.five .55~7.5 .75~fifteen one.5~22
Ratio 10.27~165.71 11.46~244.74 ten.78~196.21 eleven.55~227.20 9.ninety six~241.09 11.eighty three~223.26 twelve.seventy five~230.forty eight
Permissible Torque(N.m) 90 a hundred and seventy 300 520 1270 2280 4000
Bodyweight(kg) seven ten fourteen 26 fifty one hundred one hundred seventy

two: Layout selection
 

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Quick-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

 

Components Information Sheet

Housing material

Gray Cast iron

Housing hardness

HBS163~255

Gear material

20CrMnTi alloy metal

Floor hardness of gears

HRC58°~62 °

Gear core hardness

HRC33~forty eight

Enter / Output shaft content

40Cr alloy metal

Enter / Output shaft hardness

HRC32~36

Machining precision of gears

exact grinding, 6~5 Grade

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Heat treatment

tempering, cementiting, quenching, normalizing, and so on.

Efficiency

94%~ninety six% (relies upon on the transmission phase)

Sounds (MAX)

sixty~68dB

Temp. increase (MAX)

40°C

Temp. rise (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Model of bearings

China prime brand name bearing, HRB/LYC/ZWZ/C&U. Or other makes requested, SKF, FAG, INA, NSK.

Brand name of oil seal

NAK — ZheJiang or other makes requested

 

In depth Photographs

 

 

Our process of manufacturing

 

 

Our merchandise line

 

 

Business Profile

 

Company Profile

Bode  was founded in 2007, which is positioned in HangZhou town, ZHangZhoug province. As 1 professional maker and exporter, we have far more than seventeen years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare elements. We have factory with advanced production and examination equipment, the strong advancement of group and producing capacity offer you our consumers with higher high quality products. Our items widely served to different industries of Metallurgy, Chemical substances, lifting, mining, Petroleum, textile, medicine, wood etc. Main marketplaces: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to request us any questions, good offer constantly for you for extended time period enterprise.

FAQ

Q1: Are you buying and selling business or producer?
A: We are factory.

Q2: What sorts of gearbox can you generate for us?
A: Principal items of our organization: R, S, K, F sequence helical-tooth reducer, RV series worm equipment reducer,H Collection Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as per custom made drawing?
A: Yes, we supply custom-made service for customers.

Q4: Can we buy 1 computer of each product for high quality screening?
A: Of course, we are happy to take demo purchase for top quality tests.

Q5: What details shall we give before placing a buy buy?
A:  a) Variety of the gearbox, ratio, input and output kind, input flange, mounting place, and motor informationetc.
     b) Housing coloration.
     c) Buy amount.
     d) Other specific needs.

Q6: How lengthy is your delivery time?
A: Normally it is 5-ten times if the products are in stock. or it is 15-twenty times if the products are not in inventory.

Q7: What is your phrases of payment ?
A: thirty% Advance payment by T/T soon after signing the deal.70% prior to delivery

If you are fascinated in our item, welcome to speak to with us.
Our staff will do our very best to meet your require 🙂 
 

 

US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested
US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
worm reducer

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
worm reducer

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
worm reducer

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

China S Series Hollow Shaft Helical Worm Gear Box with IEC Motor     manufacturer China S Series Hollow Shaft Helical Worm Gear Box with IEC Motor     manufacturer
editor by czh 2023-01-20

China High Quality Powder Metallurgy Worm Gear Reducer S Series Gear Box aluminum worm gearbox

Solution Description


Exceptional powder metallurgy elements metallic sintered elements
We could supply numerous powder metallurgy elements which includes iron based mostly and copper primarily based with prime top quality and cheapest cost, you should only deliver the drawing or sample to us, we will in accordance to customer’s requirement to make it. if you are intrigued in our merchandise, you should do not be reluctant to contact us, we would like to provide the prime quality and very best services for you. thank you!

How do We Operate with Our Customers
one. For a design specialist or a huge company with your very own engineering crew: we choose to receive a completely RFQ pack from you including drawing, 3D model, quantity, photographs

two. For a start off-up firm operator or eco-friendly hand for engineering: just deliver an idea that you want to try out, you do not even require to know what casting is

three. Our sales will reply you inside 24 hrs to verify even more information and give the estimated quote time

4. Our engineering crew will consider your inquiry and offer our offer you inside of subsequent 1~3 working days.

5. We can prepare a complex conversation assembly with you and our engineers with each other anytime if required.

Location of origin: Jangsu,China
Kind: Powder metallurgy sintering
Spare components variety: Powder metallurgy areas
Machinery Test report: Supplied
Substance: Iron,stainless,metal,copper
Important selling points: Quality assurance
Mould kind: Tungsten steel
Materials regular: MPIF 35,DIN 3571,JIS Z 2550
Application: Little property appliances,Lockset,Electric powered instrument, auto,
Model Identify: OEM Service
Plating: Custom-made
Following-income Support: On the web support
Processing: Powder Metallurgr,CNC Machining
Powder Metallurgr: Large frequency quenching, oil immersion
Top quality Control: a hundred% inspection

The Advantage of Powder Metallurgy Process

one. Value effective
The final items can be compacted with powder metallurgy strategy ,and no need or can shorten the processing of machine .It can conserve materials significantly and reduce the creation expense .

two. Complex designs
Powder metallurgy enables to receive complicated styles straight from the compacting tooling ,without any machining operation ,like tooth ,splines ,profiles ,frontal geometries etc.

three. Substantial precision
Achievable tolerances in the perpendicular path of compacting are typically IT 8-9 as sintered,improvable up to IT 5-7 after sizing .Further machining operations can improve the precision .

four. Self-lubrication
The interconnected porosity of the material can be stuffed with oils ,acquiring then a self-lubricating bearing :the oil gives continuous lubrication amongst bearing and shaft ,and the technique does not need any extra external lubricant .

five. Eco-friendly technology
The production process of sintered elements is qualified as ecological ,simply because the substance squander is very lower ,the item is recyclable ,and the vitality efficiency is good due to the fact the material is not molten. 

FAQ
Q1: What is the variety of payment?
A: Normally you should prepay 50% of the total volume. The stability need to be spend off before shipment.

Q2: How to promise the higher top quality?
A: a hundred% inspection. We have Carl Zeiss large-precision tests tools and tests division to make confident each merchandise of dimensions,physical appearance and strain test are great. 

Q3: How prolonged will you give me the reply?
A: we will get in touch with you in twelve hrs as soon as we can.

Q4. How about your shipping and delivery time?
A: Typically, it will consider twenty five to 35 times following receiving your progress payment. The specific shipping and delivery time relies upon on the products and the amount of your order. and if the product was non regular, we have to contemplate additional 10-15days for tooling/mould produced.

Q5. Can you generate in accordance to the samples or drawings?
A: Of course, we can create by your samples or specialized drawings. We can develop the molds and fixtures.

Q6: How about tooling Demand?
A: Tooling cost only demand when when first order, all long term orders would not charge once more even tooling mend or beneath maintance.

Q7: What is your sample coverage?
A: We can offer the sample if we have prepared components in inventory, but the customers have to spend the sample price and the courier cost.

Q8: How do you make our organization long-time period and good connection?
A: 1. We preserve great top quality and aggressive price tag to make certain our clients reward
    2. We respect each customer as our buddy and we sincerely do business and make close friends with them, no subject where they appear from.
 

US $0.1-5
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Four-Step

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Place of origin: Jangsu,China
Type: Powder metallurgy sintering
Spare parts type: Powder metallurgy parts
Machinery Test report: Provided
Material: Iron,stainless,steel,copper
Key selling points: Quality assurance
Mould type: Tungsten steel
Material standard: MPIF 35,DIN 30910,JIS Z 2550
Application: Small home appliances,Lockset,Electric tool, automobile,
Brand Name: OEM SERVICE
Plating: Customized
After-sales Service: Online support
Processing: Powder Metallurgr,CNC Machining
Powder Metallurgr: High frequency quenching, oil immersion
Quality Control: 100% inspection
US $0.1-5
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Four-Step

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Place of origin: Jangsu,China
Type: Powder metallurgy sintering
Spare parts type: Powder metallurgy parts
Machinery Test report: Provided
Material: Iron,stainless,steel,copper
Key selling points: Quality assurance
Mould type: Tungsten steel
Material standard: MPIF 35,DIN 30910,JIS Z 2550
Application: Small home appliances,Lockset,Electric tool, automobile,
Brand Name: OEM SERVICE
Plating: Customized
After-sales Service: Online support
Processing: Powder Metallurgr,CNC Machining
Powder Metallurgr: High frequency quenching, oil immersion
Quality Control: 100% inspection

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China High Quality Powder Metallurgy Worm Gear Reducer S Series Gear Box     aluminum worm gearboxChina High Quality Powder Metallurgy Worm Gear Reducer S Series Gear Box     aluminum worm gearbox
editor by czh 2022-11-27

Polycarbonate Solid price S Custom heet PC Sheet for Worm Gear

Product Description

Product Description:

Technical data of Solid CZPT carbonate  sheet 
 

Item Unit Index Value Test Method(ASTM)
Specific Gravity  g/cm3 1.2 D-792
Impact CZPT (Izod,Nick) J/M 907 D-256
Tensile Yield CZPT   Mpa 69 D638
Tensile Break CZPT   71
Tensile Elongation,yield % 6.5
Tensile Elongation,break 120
Tensile CZPT Mpa 86 D-695
Tensile Modulus 2400 D-638

 

Products Features:

 

Good light transmisson :60-92%

Good weather resistance and UV protection

Wide service temperature range -40ºC to 120 ºC

High impact strength : 200 times of common glass ,20 times of acrylic

Light weight

Good effect of soundproof 

Simple installed 

Ten years quality guarantee

For large order, color and size can be CZPT ized.

Package :PE Film +Kraft +Pallet  according to CZPT er request 

Our Services:
 

1. Reply your inquiry in the soonest time, 24 Hours online.

2.Experienced staffs answer all your questions. 

3. CZPT ized design is CZPT and CZPT is welcomed.

4. Special discount and protection of sales area provided to CZPT distributor.

5. The price we will offer referring to your detail request, so please kingly inform us the thickness, size, color and other requirements you prefer, and the special offer will be given.

6. We can produce CZPT polycarbonate sheets and we are willing to offer you some advice for reference.

Company Information:

  HangZhou NILIN New CZPT CZPT nology  Co., Ltd. started since 2017 and are an influential enterprise specializing  in PC (polycarbonate) sheeting and PC profile. We have 2 main production lines and we use 100% virgin Makrolon resin from Bayer and Lexan resin from SABIC. Our annual production capacity is 9000 Metric Tons. We got ISO9001:2015 quality system certificate and ROHS.Our  brand pc hollow sheet, solid pc sheet and PC profile which are well know of their stable quantity and it is CZPT in a diverse variety with complete specifications, thus it is able to meet the different requirements of CZPT CZPT ers. we can also process large orders to CZPT CZPT ers’ specifications and samples.NILIN products feature super weather and impact resistance, and good light transmission. CZPT weight, and easy to install, they are widely used in agriculture CZPT house,construction projects, decorative roofing & Transparent partition PC panle ,pc protective cover PC protective glasses,advertising displays and so on.As a result of CZPT products’ high quality, competitive price and large selection, NILIN PC sheets sell well both at home and abroad. We sincerely invite interested parties to contact us and all enquiries will receive CZPT closest .

FAQ:
 

Q: Are you manufacture or trading company?

A: We are manufacturer and CZPT combine.

Q: How can I get the samples?

A: chagre of  free about sample, you side pay delivery fee only.

Q: Can you give me discount?

A: Yes, of course. If you contact me, you’ll get more.

Q: Can the factory make the CZPT service or make CZPT own packaging with logo?

A: We can accept the CZPT service and can make your logo on packaging.

Q: What kind of payment terms you can accept?

A: We can accept T/T, L/C, and CZPT ern CZPT .

Q: What is your shipping terms?

A: For small trial order, FEDEX, DHL, UPS, TNT etc can be provided.

B: For larger order, we can arrange shipment by sea, by air according to your requirement.

 

German Type Style Worm Gear Hose Clamp Pipe best Spiral Clamp price s

Product Description

Packaging & Delivery

Bags and cartons as clients’ requirements inner is plastic and outside is carton.
Port
HangZhou/ZheJiang
Lead Time:

Quantity(Pieces) 1 – 500 >500
Est. Time(days) 7 To be negotiated

Product Description

Place of Origin

ZHangZhoug,China(Mainland)

Brand Name

Winnow-Intl

Color

Sliver

Material

Stainless Steel 201/304/316;W2;W4

Band width

According to your requirement

Surface

Zinc Plate, Polishing, Brushing etc.

Package

Carton + pallet

Application

Automobile, Aviation, Pipe Connection

Item Name

  Germany type hose clamp

MOQ

500 Pieces

  • W2 band: housing with all stainless steel 201, zinc-plated screw 
  • W4 band: housing and screw with all stainless steel 304 or 201

Detailed Images

About us
Packing & CZPT     

Neutral Packing:1PC/ PE Bag    Inner box as CZPT er’s request. 
Large trucks ready transpertation,transpertation volume high speed.
FAQ

Q1: How about the payment terms?
A1:Normally 30% deposit in CZPT . It can be discussed when we have friendly relationship.

Q2: How about Delivery time?

A2:Normally, 7-15 days.

Q3: Can I get a sample?
A3:For sure, we are willing to supply samples free for quality checking.

Q4 : What’s the price?
A4:Reasonable price, competitive price, and acceptable prices, which are all based on good quality.
 

*Drawings, photos and samples are welcomed.
*We can according to your requirement or samples to do the product.
*Any questions or need more information, please feel free to conact with us.
*We are looking forward to have a good cooperation with you.
*welcome to visit CZPT factory!

S near me mr Helical Gear Box Tran sales smission Gear Reducer

Product Description

SMR Reducer Specification
 
 
1 Output Hub

Standard or alternative hubs with metric bores are available to suit international standard shaft diameters.

2 Precision High Quality Gearing 

Computer Designed Helical Gears, Strong Alloy  Materials  for  High  Load  Capacity, Case  Carburized  for  long  life,  Ground Profile(some intermediate pinions are shaved) Crown tooth Profile, In Conformance  with  ISO  1328-1997,  98% Efficiency  for  Per  Stage,  Smooth  Quiet Operation with Several Teeth in Mesh.

3 Maximum Capacity Housing Design
 
Close  Grain  Cast  Iron  Construction,  Excellent  Vibration  Dampening  &  Shock Resistance Features, Precision Bored and Dowelled to Ensure Accurate In-Line Assembly.

4 Strong Alloy Steel Shafts

Strong Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions, for
Maximum Load and Maximum Torsional Loads. Generous Size Shaft
Keys for Shock Loading and Conform to ISO Standards.

5 Additional Case Lugs Except H and J Gear Case

Eliminates the Need for Critical Tightening of Torque Arm Bolts. Controls Position of
Standard Torque Arm Mounting within Recommended limits.

6 BackStops

Alternative Parts, Antirun Back Device, AreAvailable on all 13:1 and 20:1 Ratio Units and do not recommend for 5:1 Units.

7 Bearings and Oilseals

Bearings are Adequately Proportioned and Conform to ISO Dimension Plan, Readily
Available WorldWide. Oilseals are Double Lipped Garter Spring Type, Ensuring Effective Oil Sealing.

8 Rubberised End Caps

Self Sealing Intermediate Cover Plates, to Standard ISO Housing Dimensions.

9 Torque Arm Assembly

For Easy Adjustment of the Belt.

SIZE : SMR B C D E F G H 

RATIO : 5:1  13:1  20:1 

Contact Me

Welcome to contact William for more details!

 

Model B13/B20 C13/C20 D13/D20 E13/C20 F13/E20 G13/F20 H13/G20 J13/J20
Output(RPM) 10-115 10-110 10-110 10-105 10-105 10-100 10-100 10-100
Power Rating(KW) 0.29-3.11 0.49-4.62 0.82-7.81 1.25-11.55 1.97-17.01 3.11-27.09 4.9-40.7 7.8-60.5
Permissible torque(Nm) 277 468 783 1194 1881 2970 4680 7449

 

Model B5 C5 D5 E5 F5 G5 H5 J5
Output(RPM) 100-400 100-400 100-400 100-400 100-400 100-400 100-400 100-400
Power Rating(KW) 2.68-7.14 4.2-9.66 6.62-15.65 10.29-24.57 15.12-35.91 25.2-59.9 36.2-81.9 62.2-134.2
Permissible torque(Nm) 256 401 632 983 1444 2407 3457 5940

 

 

Dimension(mm) SMR Size
SMR-B SMR-C SMR-D SMR-E SMR-F SMR-G SMR-H SMR-J
Standard size of shaft 30 40 50 55 65 75 85 100
Alternative size of shaft 40 50 55 65 75 85 100 120
Input shaft keyway 6×3.5×50 6×3.5×59 8x4x63 8x4x70 10x5x70 12x5x90 14×5.5×100 16x6x100

 

 

Company Profile

l  The largest manufacturer and exporter of CZPT reducers in Asia.

 

l  Established in 1976, we transformed from a county owned factory to private one in 1996. HangZhou SINO-DEUTSCH CZPT TRANSMISSION EQUIPMENT CO.,LTD is CZPT new name since 2001.

 

l  We are the first manufacturer of reducers and gearboxes in CZPT who was given export license since year 1993.

 

l  “Fixedstar” brand gearboxes and reducers are the first owner of CZPT NA TOP BRAND and Most CZPT CZPT Mark for reducers.
 

First to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in CZPT .

   

 

 

As a professional manufacturer of worm gearbox and worm gear reducers in CZPT , we mainly produce reduction gearbox,aluminum case CZPT boxes,arc gear cylindrical CZPT boxes, CZPT reducers, in line CZPT cal gearboxes, and cyclo drive reducers, etc. These products feature rational structure, stable performance, and reliable quality, and so on. They are widely used in CZPT , mining, metallurgy, building material, chemical, food, printing, ceramic, paper-making, tobacco, and other industries.

 

 

 

 

We have 600 workers in CZPT factory, which covers 70,000 square meters in HangZhou. We have been making 2,500 units of reducers everyday since 2012. We are proudly exporting 70% of CZPT products to more than 40 countries all over the word. Our CZPT ers come from CZPT , Germany, USA, Canada, Spain, UK, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries in the world. 30% of them are CZPT made for direct manufacturers of other products. 

 

 

 

 

 

 

 

We warmly welcome CZPT ers from other parts of the world to visit us. Seeing is believing. We are very confident that after visiting CZPT facility, you will have confidence on CZPT products. We have the latest automatic equipments and experienced workers to ensure the stable quality and large output. We have the most sophisticated technical and CZPT team to support most demanding requirement on standard and CZPT products.

 

 

 

Looking forward to meeting you in HangZhou, CZPT .

S sales mr Shaft Mounting Reducer Speed Reducer Gear Gearbox The Cheapest Pr price ice in China

Product Description

SMR Reducer Specification
 
 
1 Output Hub

Standard or alternative hubs with metric bores are available to suit international standard shaft diameters.

2 Precision High Quality Gearing 

Computer Designed Helical Gears, Strong Alloy  Materials  for  High  Load  Capacity, Case  Carburized  for  long  life,  Ground Profile(some intermediate pinions are shaved) Crown tooth Profile, In Conformance  with  ISO  13281997,  98% Efficiency  for  Per  Stage,  Smooth  Quiet Operation with Several Teeth in Mesh.

3 Maximum Capacity Housing Design
 
Close  Grain  Cast  Iron  Construction,  Excellent  Vibration  Dampening  &  Shock Resistance Features, Precision Bored and Dowelled to Ensure Accurate In-Line Assembly.

4 Strong Alloy Steel Shafts

Strong Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions, for
Maximum Load and Maximum Torsional Loads. Generous Size Shaft
Keys for Shock Loading and Conform to ISO Standards.

5 Additional Case Lugs Except H and J Gear Case

Eliminates the Need for Critical Tightening of Torque Arm Bolts. Controls Position of
Standard Torque Arm Mounting within Recommended limits.

6 BackStops

Alternative Parts, Antirun Back Device, AreAvailable on all 13:1 and 20:1 Ratio Units and do not recommend for 5:1 Units.

7 Bearings and Oilseals

Bearings are Adequately Proportioned and Conform to ISO Dimension Plan, Readily
Available WorldWide. Oilseals are Double Lipped Garter Spring Type, Ensuring Effective Oil Sealing.

8 Rubberised End Caps

Self Sealing Intermediate Cover Plates, to Standard ISO Housing Dimensions.

9 Torque Arm Assembly

For Easy Adjustment of the Belt.

SIZE : SMR B C D E F G H 

RATIO : 5:1  13:1  20:1 

Contact Me

Welcome to contact William for more details!

 

Model B13/B20 C13/C20 D13/D20 E13/C20 F13/E20 G13/F20 H13/G20 J13/J20
Output(RPM) 10-115 10-110 10-110 10-105 10-105 10-100 10-100 10-100
Power Rating(KW) 0.29-3.11 0.49-4.62 0.82-7.81 1.25-11.55 1.97-17.01 3.11-27.09 4.9-40.7 7.8-60.5
Permissible torque(Nm) 277 468 783 1194 1881 2970 4680 7449

 

Model B5 C5 D5 E5 F5 G5 H5 J5
Output(RPM) 100-400 100-400 100-400 100-400 100-400 100-400 100-400 100-400
Power Rating(KW) 2.68-7.14 4.2-9.66 6.62-15.65 10.29-24.57 15.12-35.91 25.2-59.9 36.2-81.9 62.2-134.2
Permissible torque(Nm) 256 401 632 983 1444 2407 3457 5940

 

 

Dimension(mm) SMR Size
SMR-B SMR-C SMR-D SMR-E SMR-F SMR-G SMR-H SMR-J
Standard size of shaft 30 40 50 55 65 75 85 100
Alternative size of shaft 40 50 55 65 75 85 100 120
Input shaft keyway 6×3.5×50 6×3.5×59 8x4x63 8x4x70 10x5x70 12x5x90 14×5.5×100 16x6x100

 

 

Company Profile

l  The largest manufacturer and exporter of CZPT reducers in Asia.

 

l  Established in 1976, we transformed from a county owned factory to private one in 1996. HangZhou SINO-DEUTSCH CZPT TRANSMISSION EQUIPMENT CO.,LTD is CZPT new name since 2001.

 

l  We are the first manufacturer of reducers and gearboxes in CZPT who was given export license since year 1993.

 

l  “Fixedstar” brand gearboxes and reducers are the first owner of CZPT NA TOP BRAND and Most CZPT CZPT Mark for reducers.

    CZPT to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in CZPT .

   
As a professional manufacturer of worm gearbox and worm gear reducers in CZPT , we mainly produce reduction gearbox,aluminum case CZPT boxes,arc gear cylindrical CZPT boxes, CZPT reducers, in line CZPT cal gearboxes, and cyclo drive reducers, etc. These products feature rational structure, stable performance, and reliable quality, and so on. They are widely used in CZPT , mining, metallurgy, building material, chemical, food, printing, ceramic, paper-making, tobacco, and other industries.

 

 

 

 

We have 600 workers in CZPT factory, which covers 70,000 square meters in HangZhou. We have been making 2,500 units of reducers everyday since 2012. We are proudly exporting 70% of CZPT products to more than 40 countries all over the word. Our CZPT ers come from CZPT , Germany, USA, Canada, Spain, UK, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries in the world. 30% of them are CZPT made for direct manufacturers of other products. 

 

 

 

 

 

 

 

We warmly welcome CZPT ers from other parts of the world to visit us. Seeing is believing. We are very confident that after visiting CZPT facility, you will have confidence on CZPT products. We have the latest automatic equipments and experienced workers to ensure the stable quality and large output. We have the most sophisticated technical and CZPT team to support most demanding requirement on standard and CZPT products.

 

 

 

Looking forward to meeting you in HangZhou, CZPT .

Sw wholesaler l20 Manual Screw Jack, Swl20t Worm Screw Jack, Swl 20 Ton Type of Screw Jack, Swl 20t Worm Gear Screw Lift Gear, S near me wlb20 Metric Ball Screw Jack

Product Description

Find complete details from Swl20 Manual CZPT Jack, Swl20t Worm CZPT Jack, Swl 20 Ton Type of CZPT Jack, Swl 20t Worm Gear CZPT CZPT Gear, Swlb20 Metric Ball CZPT Jack manufacturer and supplier. CZPT Industry provides top quality swl1 to swl100 screw jacks meet your requirements. Contact us today. 

SWL20 CZPT Jack Features
1. CZPT imum lifting capacities 20 ton
2. CZPT ing screw sizes Tr 65×12
3. Worm gear ratios 8:1, 24:1
4. CZPT made lifts height up to 4500mm
5. End fittings: top plate, clevis end, threaded end, plain end, forked head and rod end
6. Translating screw,  Anti-rotation (keyed) screw and CZPT screw configurations
7. CZPT source: CZPT ctric CZPT n and Manual Operated both are CZPT
8. Single, double, three, four, six or eight jacks systems versions are CZPT .
9. CZPT CZPT Steel CZPT Jack design CZPT

SWL20 CZPT Jack main components with international standard materials: The main components are trapezoidal lifting screw (worm screw) with C45 steel material, CZPT or travelling nut with bronze material, worm shaft with heat treatment C45 steel material, thrust bearings, grease seals and gear housing with ductile iron.

SWL20 CZPT Jack Specifications
1. Note: The dark gray figures in the tables indicates operational restrictions due to thermal limits. Selection of screw jacks using these figures should only be carried out in consultation with CZPT engineers. When your selection is made within the areas shaded dark gray, you will need to reduce duty cycle or choose the bigger size screw jack in order to allow effective heat dissipation.
2. Conditions: 20% running time/60 minutes or 30% running time/10 minutes, 20 °C ambient temperature. 
3. H=high ratio, L=slow ratio.
4. Nm=input torque required, kW=input CZPT required.  

SWL20 CZPT Jack Dimension Drawing
Find out SWL20 CZPT Jack CZPT view, side view and top view assembly drawings. About 2D CZPT cad dwg, dxf assembly drawings, and 3D stp, step, model, igs, prt or catpart assembly drawings, please contact us directly.

Shipment and Packing Pictures 
Shipping:
1. CZPT freight: seaport to seaport, price terms CIF, FOB, EXW, CFR etc.
2. Air freight: airport to airport, price terms EXW, CRF etc.
3. Air courier: DHL, FEDEX, UPS, TNT door to door shipment, price terms DDU, CPT etc.
Packing: 
100% standard exporting plywood cases. 
Note: International Exporting Standard CZPT Material with Free Fumigation.

Company Profiles
JACTON Industry Co.,Ltd (VAT No.: 9144190007026567X3, registered Capital 500000CNY) is a leading manufacturer and supplier of CZPT Jacks (Mechanical Actuators), Bevel Gearboxes, CZPT ing Systems, CZPT ctric CZPT Actuators, Gearmotors and CZPT Reducers, CZPT s CZPT Motion and CZPT Transmission Products in CZPT . We are located in Chang An, Xihu (West CZPT ) Dis. guan, CZPT g dong in CZPT . We are an audited professional manufacturer and supplier by SGS (Serial NO.: QIP-ASI192186) and BV (Serial NO.: MIC-ASR257162) organizations. We have a strict quality system, with senior engineers, experienced skilled workers and practiced sales teams, and consistently provide the CZPT ers with the best engineered solution for precision linear actuation, CZPT transmission and mechanical jacking systems. CZPT Industries guarantees quality, reliability, performance and value for today’s demanding industrial applications.

Company Advantages
* One of the biggest orders with 1750 units screw jacks.
* Standard products with 2D Drawings(DXF, DWG, PDF) and 3D CAD Model(STEP).
* 100% quality assured with double quality inspections. Original Inspection Reports, Operation Manual, and Book Catalogue are put into the packages. 
* 100% safety transportation with strong standard export plywood cases materials (free fumigation). 
* CZPT standard materials for all standard products. 
* CZPT design CZPT , CZPT service CZPT , Free CZPT advice and CZPT er label CZPT .

Products List
* Manual CZPT Jacks.
* CZPT ctric CZPT Jacks.
* Worm Gear CZPT Jacks Series.
* Bevel Gear CZPT Jack Series.
* CZPT ctric Cylinders Series.
* Spiral Bevel Gearboxes Series.
* Lifting Systems and Accessories.
* CZPT ctric CZPT Actuators Series.
* Geared CZPT and Gear Reducers Series.

Customers Distribution Countries
* CZPT ican Countries: United States, Mexico, Canada, Chile, Argentina, Xihu (West CZPT ) Dis.via, Brazil, Colombia, Guatemala, Honduras, Panama, Peru.
* CZPT pean Countries: Germany, France, CZPT CZPT dom, CZPT , Spain, Poland, CZPT ia, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Georgia, Slovenia.
* Asian Countries: Malaysia, Indonesia, Singapore, Philippines, Vietnam, Thailand, India, Israel, Cambodia, Myanmar, Sri Lanka, Maldives, Pakistan, Iran, Turkey, Jordan, Saudi Arabia, Yemen, Oman, CZPT Arab Emirates, Qatar, Georgia, Armenia.
* CZPT ian Countries: Australia, New Zealand.
* African Countries: Egypt, Ethiopia, Nigeria, South Africa, Zambia, Mozambique.

Fixedstar Brands of Shaft supplier Gear Smr S sales haft Mounted Reducer Strong Gearbox

Product Description

SMR Reducer Specification
 
 
1 Output Hub

Standard or alternative hubs with metric bores are available to suit international standard shaft diameters.

2 Precision High Quality Gearing 

Computer Designed Helical Gears, Strong Alloy  Materials  for  High  Load  Capacity, Case  Carburized  for  long  life,  Ground Profile(some intermediate pinions are shaved) Crown tooth Profile, In Conformance  with  ISO  1328-1997,  98% Efficiency  for  Per  Stage,  Smooth  Quiet Operation with Several Teeth in Mesh.

3 Maximum Capacity Housing Design
 
Close  Grain  Cast  Iron  Construction,  Excellent  Vibration  Dampening  &  Shock Resistance Features, Precision Bored and Dowelled to Ensure Accurate In-Line Assembly.

4 Strong Alloy Steel Shafts

Strong Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions, for
Maximum Load and Maximum Torsional Loads. Generous Size Shaft
Keys for Shock Loading and Conform to ISO Standards.

5 Additional Case Lugs Except H and J Gear Case

Eliminates the Need for Critical Tightening of Torque Arm Bolts. Controls Position of
Standard Torque Arm Mounting within Recommended limits.

6 BackStops

Alternative Parts, Antirun Back Device, AreAvailable on all 13:1 and 20:1 Ratio Units and do not recommend for 5:1 Units.

7 Bearings and Oilseals

Bearings are Adequately Proportioned and Conform to ISO Dimension Plan, Readily
Available WorldWide. Oilseals are Double Lipped Garter Spring Type, Ensuring Effective Oil Sealing.

8 Rubberised End Caps

Self Sealing Intermediate Cover Plates, to Standard ISO Housing Dimensions.

9 Torque Arm Assembly

For Easy Adjustment of the Belt.

SIZE : SMR B C D E F G H 

RATIO : 5:1  13:1  20:1 

Contact Me

Welcome to contact William for more details!

Model B13/B20 C13/C20 D13/D20 E13/C20 F13/E20 G13/F20 H13/G20 J13/J20
Output(RPM) 10-115 10-110 10-110 10-105 10-105 10-100 10-100 10-100
Power Rating(KW) 0.29-3.11 0.49-4.62 0.82-7.81 1.25-11.55 1.97-17.01 3.11-27.09 4.9-40.7 7.8-60.5
Permissible torque(Nm) 277 468 783 1194 1881 2970 4680 7449

Model B5 C5 D5 E5 F5 G5 H5 J5
Output(RPM) 100-400 100-400 100-400 100-400 100-400 100-400 100-400 100-400
Power Rating(KW) 2.68-7.14 4.2-9.66 6.62-15.65 10.29-24.57 15.12-35.91 25.2-59.9 36.2-81.9 62.2-134.2
Permissible torque(Nm) 256 401 632 983 1444 2407 3457 5940

 

Dimension(mm) SMR Size
SMR-B SMR-C SMR-D SMR-E SMR-F SMR-G SMR-H SMR-J
Standard size of shaft 30 40 50 55 65 75 85 100
Alternative size of shaft 40 50 55 65 75 85 100 120
Input shaft keyway 6×3.5×50 6×3.5×59 8x4x63 8x4x70 10x5x70 12x5x90 14×5.5×100 16x6x100

 

 

Company Profile
 

l  The largest manufacturer and exporter of CZPT reducers in Asia.

 

l  Established in 1976, we transformed from a county owned factory to private one in 1996. HangZhou SINO-DEUTSCH CZPT TRANSMISSION EQUIPMENT CO.,LTD is CZPT new name since 2001.

 

l  We are the first manufacturer of reducers and gearboxes in CZPT who was given export license since year 1993.

 

l  “Fixedstar” brand gearboxes and reducers are the first owner of CZPT NA TOP BRAND and Most CZPT CZPT Mark for reducers.

First to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in CZPT .

   
As a professional manufacturer of worm gearbox and worm gear reducers in CZPT , we mainly produce reduction gearbox,aluminum case CZPT boxes,arc gear cylindrical CZPT boxes, CZPT reducers, in line CZPT cal gearboxes, and cyclo drive reducers, etc. These products feature rational structure, stable performance, and reliable quality, and so on. They are widely used in CZPT , mining, metallurgy, building material, chemical, food, printing, ceramic, paper-making, tobacco, and other industries.

 

   

 

We have 600 workers in CZPT factory, which covers 70,000 square meters in HangZhou. We have been making 2,500 units of reducers everyday since 2012. We are proudly exporting 70% of CZPT products to more than 40 countries all over the word. Our CZPT ers come from CZPT , Germany, USA, Canada, Spain, UK, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries in the world. 30% of them are CZPT made for direct manufacturers of other products. 

 

 

 

We warmly welcome CZPT ers from other parts of the world to visit us. Seeing is believing. We are very confident that after visiting CZPT facility, you will have confidence on CZPT products. We have the latest automatic equipments and experienced workers to ensure the stable quality and large output. We have the most sophisticated technical and CZPT team to support most demanding requirement on standard and CZPT products.

 

 

 

Looking forward to meeting you in HangZhou, CZPT .

Small Worm Gear Sets Wheel Bronze Ground Shaft Plastic Helical Brass Self Locking S factory upplier Micro Outdoor Ride Spare Spur best Manufacturer Forklift Worm Gear Sets

Product Description

    Small Worm Gear Sets Wheel Bronze Ground Shaft Plastic CZPT cal Brass Self Locking Supplier Micro Outdoor Ride CZPT Spur CZPT r Forklift Worm Gear Sets

 

S wholesaler mr Shaft Mounted Reducer Gear Reducer Metric Size Transmission Ge Cost arbox

Product Description

SMR Reducer Specification
 
 
1 Output Hub

Standard or alternative hubs with metric bores are available to suit international standard shaft diameters.

2 Precision High Quality Gearing 

Computer Designed Helical Gears, Strong Alloy  Materials  for  High  Load  Capacity, Case  Carburized  for  long  life,  Ground Profile(some intermediate pinions are shaved) Crown tooth Profile, In Conformance  with  ISO  1328-1997,  98% Efficiency  for  Per  Stage,  Smooth  Quiet Operation with Several Teeth in Mesh.

3 Maximum Capacity Housing Design
 
Close  Grain  Cast  Iron  Construction,  Excellent  Vibration  Dampening  &  Shock Resistance Features, Precision Bored and Dowelled to Ensure Accurate In-Line Assembly.

4 Strong Alloy Steel Shafts

Strong Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions, for
Maximum Load and Maximum Torsional Loads. Generous Size Shaft
Keys for Shock Loading and Conform to ISO Standards.

5 Additional Case Lugs Except H and J Gear Case

Eliminates the Need for Critical Tightening of Torque Arm Bolts. Controls Position of
Standard Torque Arm Mounting within Recommended limits.

6 BackStops

Alternative Parts, Antirun Back Device, AreAvailable on all 13:1 and 20:1 Ratio Units and do not recommend for 5:1 Units.

7 Bearings and Oilseals

Bearings are Adequately Proportioned and Conform to ISO Dimension Plan, Readily
Available WorldWide. Oilseals are Double Lipped Garter Spring Type, Ensuring Effective Oil Sealing.

8 Rubberised End Caps

Self Sealing Intermediate Cover Plates, to Standard ISO Housing Dimensions.

9 Torque Arm Assembly

For Easy Adjustment of the Belt.

SIZE : SMR B C D E F G H 

RATIO : 5:1  13:1  20:1 

Contact Me

Welcome to contact William for more details!

 

Model B13/B20 C13/C20 D13/D20 E13/C20 F13/E20 G13/F20 H13/G20 J13/J20
Output(RPM) 10-115 10-110 10-110 10-105 10-105 10-100 10-100 10-100
Power Rating(KW) 0.29-3.11 0.49-4.62 0.82-7.81 1.25-11.55 1.97-17.01 3.11-27.09 4.9-40.7 7.8-60.5
Permissible torque(Nm) 277 468 783 1194 1881 2970 4680 7449

 

Model B5 C5 D5 E5 F5 G5 H5 J5
Output(RPM) 100-400 100-400 100-400 100-400 100-400 100-400 100-400 100-400
Power Rating(KW) 2.68-7.14 4.2-9.66 6.62-15.65 10.29-24.57 15.12-35.91 25.2-59.9 36.2-81.9 62.2-134.2
Permissible torque(Nm) 256 401 632 983 1444 2407 3457 5940

 

 

Dimension(mm) SMR Size
SMR-B SMR-C SMR-D SMR-E SMR-F SMR-G SMR-H SMR-J
Standard size of shaft 30 40 50 55 65 75 85 100
Alternative size of shaft 40 50 55 65 75 85 100 120
Input shaft keyway 6×3.5×50 6×3.5×59 8x4x63 8x4x70 10x5x70 12x5x90 14×5.5×100 16x6x100

 

 

Company Profile

l  The largest manufacturer and exporter of CZPT reducers in Asia.

 

l  Established in 1976, we transformed from a county owned factory to private one in 1996. HangZhou SINO-DEUTSCH CZPT TRANSMISSION EQUIPMENT CO.,LTD is CZPT new name since 2001.

 

l  We are the first manufacturer of reducers and gearboxes in CZPT who was given export license since year 1993.

 

l  “Fixedstar” brand gearboxes and reducers are the first owner of CZPT NA TOP BRAND and Most CZPT CZPT Mark for reducers.

First to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in CZPT .

   

 

 

As a professional manufacturer of worm gearbox and worm gear reducers in CZPT , we mainly produce reduction gearbox,aluminum case CZPT boxes,arc gear cylindrical CZPT boxes, CZPT reducers, in line CZPT cal gearboxes, and cyclo drive reducers, etc. These products feature rational structure, stable performance, and reliable quality, and so on. They are widely used in CZPT , mining, metallurgy, building material, chemical, food, printing, ceramic, paper-making, tobacco, and other industries.

 

 

 

 

We have 600 workers in CZPT factory, which covers 70,000 square meters in HangZhou. We have been making 2,500 units of reducers everyday since 2012. We are proudly exporting 70% of CZPT products to more than 40 countries all over the word. Our CZPT ers come from CZPT , Germany, USA, Canada, Spain, UK, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries in the world. 30% of them are CZPT made for direct manufacturers of other products. 

 

 

 

 

 

 

 

We warmly welcome CZPT ers from other parts of the world to visit us. Seeing is believing. We are very confident that after visiting CZPT facility, you will have confidence on CZPT products. We have the latest automatic equipments and experienced workers to ensure the stable quality and large output. We have the most sophisticated technical and CZPT team to support most demanding requirement on standard and CZPT products.

 

 

 

Looking forward to meeting you in HangZhou, CZPT .