Tag Archives: reducer price

China high quality Transmission Loss ≤ 1arc. Min RV Series Gear Reducer Gearbox Price combined worm gearbox

Product Description

Product Description

Transmission loss ≤1arc.min RV series gear reducer gearbox price

gear reducer gearbox Installed with radial thrust ball bearings, so it can support external load, torque rigidity, large allowable torque, can reduce the number of components required, easy installation. The revolution speed of WRV gears is slower and vibration is reduced, which can reduce the motor structure (input gear) and inertia.

gear reducer gearbox High precision, high rigidity, high torque, high load and other characteristics realize hollow design at the same time. After being hollowed out, the ease of use of the product is improved due to the variety of piping and cable layout options.

The gear reducer gearbox is developed on the basis of the traditional needle wheel reducer. It not only overcomes the shortcomings of the general needle pendulum transmission, but also has more advantages, such as long life, stable precision, high efficiency, smooth transmission, small size, Light weight, large reduction ratio range, etc. This RV reducer from FUBAO adopts a double support support mechanism and a pinwheel mechanism, even if a torque up to 6 times the rated torque is applied, the product will not be damaged, and the torsional rigidity is very large. Small backlash, small volume, large torque. In order to directly support large loads, main bearings (large angular contact ball bearings) are installed inside.

gear reducer gearbox mainly has the following characteristics:

A. Main bearing built-in mechanism
1. Improved reliability;
2. Total cost reduction;
3. Radial thrust ball bearings are installed, so they can support external loads, and the moment rigidity and allowable moment are large, which can reduce the number of required components;
4. The use of couplings and motor flanges makes the installation of the motor very simple.

B. 2-stage deceleration mechanism
1. Small vibration;
2. The revolution speed of the gear is slowed down, the vibration is reduced, and the direct connection part of the motor (input gear) can be reduced, and the inertia can be reduced.

C. Double column support mechanism
1. High torsional rigidity;
2. Strong impact resistance;
3. The crank shaft is supported by double columns in the reducer.

D. Rolling contact mechanism
1. Excellent starting power;
2. Small abrasion and long service life;
3. Small backlash (1arc.min).

Product Parameters

     WRV-E series Specifications WRV6E WRV20E WRV40E WRV80E WRV110E WRV160E WRV320E WR450E
Rated output torque 196 882 1666 2156 2940 3920 7056 17640
Reduction ratio 31~103 57~161 57~153 57~153 81~175 81~171 81~185 81~192
Backlash <=1 

Detailed Photos

 

 

Application Case

Company Profile

HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.

The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CZPT pursuit to make far-reaching contributions.

 

Factory Display

FAQ

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Motor, Machinery, Agricultural Machinery, Robot Arm
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction, Speed Increase, Lower Rpm and Increase Torque
Layout: Cycloidal
Customization:
Available

|

worm reducer

What is a worm gear reducer gearbox?

The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
Hollow shaft worm gear reducer gearbox

Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear

The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm reducerDouble throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
worm reducerBrass worm gear

Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China high quality Transmission Loss ≤ 1arc. Min RV Series Gear Reducer Gearbox Price   combined worm gearboxChina high quality Transmission Loss ≤ 1arc. Min RV Series Gear Reducer Gearbox Price   combined worm gearbox
editor by CX 2023-05-22

China Brand New Pulley Speed Reducer With Low Price electric tricycle gearbox worm gearbox application

2023-05-16

China Factory price NMRV030 gear reducer ratio 51 for 3D printer suitable for nema 23 motor wholesaler

Guarantee: 1 several years
Relevant Industries: Resorts, Garment Shops, Developing Materials Stores, Manufacturing Plant, Equipment Restore Retailers, Food & Beverage Manufacturing unit, Farms, Restaurant, Home Use, Retail, Foods Store, Printing Retailers, Construction works , Energy & Mining, Food & Beverage Shops, Brazil motor chain and sprocket CG150 Marketing Company, Other
Excess weight (KG): .7 KG
Custom-made assist: OEM, ODM, OEM
Gearing Arrangement: Worm gear
Output Torque: 242-766Nm
Input Velocity: 750-354215718 E mail: [email protected]:No.7HangZhou Roada-27 Zip:266032 Country/Region:China(Mainland) Province/Condition:ZheJiang City:HangZhou Welcome normal-merchandise inquiry,Welcome OEM inquiryWelcome normal-merchandise inquiry,Welcome OEM inquiry

What is a worm gear reducer gearbox?

The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
worm reducerHollow shaft worm gear reducer gearbox

Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear

The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm reducerDouble throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
worm reducerBrass worm gear

Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China Factory price NMRV030 gear reducer ratio 51 for 3D printer suitable for nema 23 motor     wholesaler China Factory price NMRV030 gear reducer ratio 51 for 3D printer suitable for nema 23 motor     wholesaler
editor by czh 2023-02-11

Gear Reducer wholesaler with Low Price and High Custom Quality

Product Description

 

Maximum torque:  20,000NM
Maximum output speed:  <1200rpm
Maximum input speed:  <2500rpm
Ratio: 3:1 up to 400:1
Output type:  square shaft
hex shaft
flange

HangZhou CZPT Inc. is a professional exporter and manufacturer of CZPT precision machined castings and machined parts in CZPT . Our machined castings include investment casting (lost wax casting), sand casting, die casting. 

We have gained rich experience for casting machining manufacture and gathered a group of skilled workers and experienced engineers with superior CZPT level. Our annual production capacity exceeds 4,000 metric tons.
 We have the most CZPT d testing facilities, such as spectral analyzer for rubber material chemical composition test, tensile strength testing machine, impact value tester and hardness meter, magnetic particle testing machine, sandblasting machine and heat treatment equipment. Besides, there are numerous CZPT d equipment in the precision machining workshop: have 23 sets CNC lathes, 10sets vertical CNC boring and milling center and one horizontal boring and milling center imported from Korea, two general milling machine, and two general lathes, one grinder, 10sets drilling and tap machines, two half automatic saw, and one Coordinate Measuring CZPT (CMM), one Projector and one machining surface quality testing machine and one Mahr altitude instrument. Our product’s tolerance can be controlled under 0.01mm. The testing machine’s accuracy is within 0.005mm. ISO9000 has been executed.  The raw materials include lost wax castings of steel and alloy steel and ductile iron, and forgings. All parts will be tested for material chemical composition, strength and Elongation. 80% of CZPT  products are exported to North CZPT ican and CZPT pean countries. Products are for hydraulic cylinder, truck brake and engine, such as hydraulic cylinder ends , rod, piston, connecting rod, oil valve, oil seals, rubber seals, brake valve of truck. At present, we are providing truck brake parts for Pacbrake.  Some of CZPT big CZPT ers are Hunter CZPT , Rocore, Engross, CZPT cat, Torbel, Fusion, Mersen and so on.

We strictly implement the ISO9000 quality system during the production.  All CZPT products are well accepted by CZPT CZPT ers. Relying on CZPT own factory, we can provide  competitive prices, technical support for quality guarantee and new product development with CZPT CZPT team. 

If some of CZPT products interest you, please feel free to contact us at any time.
We will make prompt reply to you. If possible, please provide us your wanted items drawings and photos for CZPT reference.

 Advantages:

1 Rich experience for international business,
2 prompt delivery, quality control,
3 small orders are acceptable,
4 strong ability for R&D.

FAQ:

1. Can I be your agent?

Yes, welcome to deep cooperation. We have big promotion of THINKWELL brand in the market now. For the details please contact me.

2. Is CZPT CZPT ?

Yes, CZPT is CZPT . We have professional designer to help your brand promotion.

3. How can I get a sample to check your quality?

After price confirmation, you can require for samples to check CZPT quality. Free for the samples, but you need to pay for the freight.

4. What’s your quality guarantee?

We have different kinds of products which can meet different quality standard.
Our QC department will test products before shipping. We have 100% quality guarantee to CZPT ers. We will be responsible for any quality problem.

5. How about the delivery time?

The delivery time is depending on the products and the quantity. But generally, the delivery time for a container is about one month. 

6. What’s benefit will you bring?

You will be satisfied with CZPT quality.

Welcome to CZPT company.

CONTACT:

Tel: 574 87913612
Fax: 574 87913610
Web: cnccms.en.made-in-china.com
Add: #166 CZPT gchen Road, Xiepu Tow, HangZhou, ZHangZhoug, CZPT
 
Welcome to inquiry!

If any problem, feel free to leave message on the bottom of this page.

 

CE Approve sales d Nmrv Series 0.06kw~15kw Stainless Steel Ind price ustry Worm Gear Speed Reducer Drive Gearbox

Product Description

CE Approved NMRV Series 0.06kw~15kw CZPT Steel Industry Worm Gear CZPT Reducer CZPT Gearbox

Features:
1. CZPT in weight and CZPT -rusting
2. Smooth in running, can work CZPT time in dreadful conditions
3. CZPT efficiency, low noise
4. CZPT -looking in appearance, durable in service life and small in volume

Product photo:

Specification for SS reductor:

Model 030 ~ 063
Power 0.06kw ~ 4kw
Input speed 750rpm ~ 2000rpm
Reduction ratio 1/5 ~ 1/100
Input motor AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo
Output shaft Solid shaft / Hollow shaft / Output flange…
Dimension standard Metric size / Inch size
Material of housing die-cast aluminum / Cast iron / CZPT steel
Accessories Flange / Solid shaft / Torque arm / Cover …

FAQ
Q: Can you make the reductor with CZPT ization?
A: Yes, we can CZPT ize per your request, like flange, shaft, configuration, material, etc.

Q: Do you provide samples?
A: Yes. Sample is CZPT for testing.

Q: What is your MOQ?
A: It is 10pcs for the beginning of CZPT business.

Q: What’s your lead time?
A: Standard product need 5-30days, a bit CZPT er for CZPT ized products.

Q: Do you provide technology support?
A: Yes. Our company have design and development team, we can provide technology support if you
need.

Q: How to ship to us?
A: It is CZPT by air, or by sea, or by train.

Q: How to pay the money?
A: T/T and L/C is preferred, with different currency, including USD, EUR, RMB, etc.

Q: How can I know the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.

Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.

Q: How shall we contact you?
A: You can send inquiry directly, and we will respond within 24 hours.

 

Bevel Gearbox S Series 90 Degree Helical Gea price r Box High-Quality Transmissi manufacturer on Flange Mounted Drive Motor Industries Manufacturer Speed Reducer Bevel Gearbox

Product Description

Bevel Gearbox S Series 90 degree CZPT cal Gear Box CZPT -Quality transmission Flange Mounted CZPT CZPT Industries CZPT r CZPT Reducer Bevel Gearbox

High-Quality Right CZPT le Gear CZPT s are designed for efficiency, quiet operation, and CZPT service life. CZPT -Power offers a broad selection of Right CZPT le Gear CZPT s in CZPT configurations, materials, operating speeds, and multiple ratios. Standard catalog items include precision and commercial quality gear drives offered in both inch and metric sizes. For modifications or CZPT designs call and speak to a CZPT -Power applications engineer.

Our offering includes, but is not limited to the following:

Miniature sized Right CZPT le Gear CZPT s, 1 inch square, are perfect for compact designs that require low backlash and input speeds up to 2000 rpm.

When weight is an issue, get Right CZPT le Bevel Gear CZPT s that feature a lightweight housing of PTMT CZPT ester 30% glass filled, precision ground stainless steel shafts, sintered bronze bearings and molded nylon gears.

Right CZPT le Worm Gear CZPT s accommodate input speeds up to 2000 rpm and are CZPT in gear ratios: 5:1, 10:1 and 20:1.

Right CZPT le and Dual CZPT cal Gear CZPT s are offered in two models, light-duty, rated speeds up to 600 rpm and heavy duty, rated speeds up to 1725 rpm.

 

Smr Shaft Mounte price d Reducer Custom Gearbox Gear Speed Reducer

Product Description

SMR Reducer Specification

OutpuHub

Standard or alternative hubs with metric bores are available to suit international standard shaft diameters. 

2 PrecisioHigh Quality Gearing

Computer Designed Helical Gears, Strong Alloy Materials for High Load Capacity, Case Carburized for long life, Ground Profile(some intermediate pinions are shaved) Crown tooth Profile, In Conformance with ISO 1328-1997, 98% Efficiency for Per Stage, Smooth Quiet Operation with Several Teeth in Mesh. 

MaximuCapacity Housing Design

Close Grain Cast Iron Construction, Excellent Vibration Dampening & Shock Resistance Features, Precision Bored and Dowelled to Ensure Accurate In-Line Assembly. 

4 StronAlloSteeShafts

Strong Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions, for
Maximum Load and Maximum Torsional Loads. Generous Size Shaft
Keys for Shock Loading and Conform to ISO Standards. 

AdditionaCasLugExcept anGeaCase

Eliminates the Need for Critical Tightening of Torque Arm Bolts. Controls Position of
Standard Torque Arm Mounting within Recommended limits. 

6 BackStops

Alternative Parts, Antirun Back Device, AreAvailable on all 13: 1 and 20: 1 Ratio Units and do not recommend for 5: 1 Units. 

7 Bearings and Oilseals

Bearings are Adequately Proportioned and Conform to ISO Dimension Plan, Readily
Available WorldWide. Oilseals are Double Lipped Garter Spring Type, Ensuring Effective Oil Sealing. 

8 RubberiseEnd Caps

Self Sealing Intermediate Cover Plates, to Standard ISO Housing Dimensions. 

Torque ArAssembly

For Easy Adjustment of the Belt. 

SIZE: SMR B C D E F G H

RATIO: 5: 1 13: 1 20: 1

Contact Me

Welcome to contact William for more details!  

Model B13/B20 C13/C20 D13/D20 E13/C20 F13/E20 G13/F20 H13/G20 J13/J20
Output(RPM) 10-115 10-110 10-110 10-105 10-105 10-100 10-100 10-100
Power Rating(KW) 0.29-3.11 0.49-4.62 0.82-7.81 1.25-11.55 1.97-17.01 3.11-27.09 4.9-40.7 7.8-60.5
Permissible torque(Nm) 277 468 783 1194 1881 2970 4680 7449 

 

Model B5 C5 D5 E5 F5 G5 H5 J5
Output(RPM) 100-400 100-400 100-400 100-400 100-400 100-400 100-400 100-400
Power Rating(KW) 2.68-7.14 4.2-9.66 6.62-15.65 10.29-24.57 15.12-35.91 25.2-59.9 36.2-81.9 62.2-134.2
Permissible torque(Nm) 256 401 632 983 1444 2407 3457 5940 

 

 

Dimension(mm) SMR Size
SMR-B SMR-C SMR-D SMR-E SMR-F SMR-G SMR-H SMR-J
Standard size of shaft 30 40 50 55 65 75 85 100
Alternative size of shaft 40 50 55 65 75 85 100 120
Input shaft keyway 6X3.5X50 6X3.5X59 8X4X63 8X4X70 10X5X70 12X5X90 14X5.5X100 16X6X100

Company Profile

L The largest manufacturer and exporter of CZPT reducers in Asia.  

 

L Established in 1976, we transformed from a county owned factory to private one in 1996. HangZhou SINO-DEUTSCH CZPT TRANSMISSION EQUIPMENT Co., Ltd is CZPT new name since 2001.  

 

L We are the first manufacturer of reducers and gearboxes in CZPT who was given export license since year 1993.  

 

L “Fixedstar” brand gearboxes and reducers are the first owner of CZPT TOP BRAND and Most CZPT CZPT Mark for reducers. 

First to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in CZPT . 

As a professional manufacturer of worm gearbox and worm gear reducers in CZPT , we mainly produce reduction gearbox, aluminum case CZPT boxes, arc gear cylindrical CZPT boxes, CZPT reducers, in line CZPT cal gearboxes, and cyclo drive reducers, etc. These products feature rational structure, stable performance, and reliable quality, and so on. They are widely used in CZPT , mining, metallurgy, building material, chemical, food, printing, ceramic, paper-making, tobacco, and other industries.    

 

 

 

 

We have 600 workers in CZPT factory, which covers 70, 000 square meters in HangZhou. We have been making 2, 500 units of reducers everyday since 2012. We are proudly exporting 70% of CZPT products to more than 40 countries all over the word. Our CZPT ers come from CZPT , Germany, USA, Canada, Spain, UK, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries in the world. 30% of them are CZPT made for direct manufacturers of other products.        

 

 

 

 

 

 

 

We warmly welcome CZPT ers from other parts of the world to visit us. Seeing is believing. We are very confident that after visiting CZPT facility, you will have confidence on CZPT products. We have the latest automatic equipments and experienced workers to ensure the stable quality and large output. We have the most sophisticated technical and CZPT team to support most demanding requirement on standard and CZPT products.    

 

 

 

Looking forward to meeting you in HangZhou, CZPT . 

Smr B-J Metric Shaft Mounted Reducer Gear Speed G wholesaler earb price ox

Product Description

SMR Reducer Specification
 
 
1 Output Hub

Standard or alternative hubs with metric bores are available to suit international standard shaft diameters.

2 Precision High Quality Gearing 

Computer Designed Helical Gears, Strong Alloy  Materials  for  High  Load  Capacity, Case  Carburized  for  long  life,  Ground Profile(some intermediate pinions are shaved) Crown tooth Profile, In Conformance  with  ISO  1328-1997,  98% Efficiency  for  Per  Stage,  Smooth  Quiet Operation with Several Teeth in Mesh.

3 Maximum Capacity Housing Design
 
Close  Grain  Cast  Iron  Construction,  Excellent  Vibration  Dampening  &  Shock Resistance Features, Precision Bored and Dowelled to Ensure Accurate In-Line Assembly.

4 Strong Alloy Steel Shafts

Strong Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions, for
Maximum Load and Maximum Torsional Loads. Generous Size Shaft
Keys for Shock Loading and Conform to ISO Standards.

5 Additional Case Lugs Except H and J Gear Case

Eliminates the Need for Critical Tightening of Torque Arm Bolts. Controls Position of
Standard Torque Arm Mounting within Recommended limits.

6 BackStops

Alternative Parts, Antirun Back Device, AreAvailable on all 13:1 and 20:1 Ratio Units and do not recommend for 5:1 Units.

7 Bearings and Oilseals

Bearings are Adequately Proportioned and Conform to ISO Dimension Plan, Readily
Available WorldWide. Oilseals are Double Lipped Garter Spring Type, Ensuring Effective Oil Sealing.

8 Rubberised End Caps

Self Sealing Intermediate Cover Plates, to Standard ISO Housing Dimensions.

9 Torque Arm Assembly

For Easy Adjustment of the Belt.

SIZE : SMR B C D E F G H 

RATIO : 5:1  13:1  20:1 

Contact Me

Welcome to contact William for more details!

 

Model B13/B20 C13/C20 D13/D20 E13/C20 F13/E20 G13/F20 H13/G20 J13/J20
Output(RPM) 10-115 10-110 10-110 10-105 10-105 10-100 10-100 10-100
Power Rating(KW) 0.29-3.11 0.49-4.62 0.82-7.81 1.25-11.55 1.97-17.01 3.11-27.09 4.9-40.7 7.8-60.5
Permissible torque(Nm) 277 468 783 1194 1881 2970 4680 7449

 

Model B5 C5 D5 E5 F5 G5 H5 J5
Output(RPM) 100-400 100-400 100-400 100-400 100-400 100-400 100-400 100-400
Power Rating(KW) 2.68-7.14 4.2-9.66 6.62-15.65 10.29-24.57 15.12-35.91 25.2-59.9 36.2-81.9 62.2-134.2
Permissible torque(Nm) 256 401 632 983 1444 2407 3457 5940

 

 

Dimension(mm) SMR Size
SMR-B SMR-C SMR-D SMR-E SMR-F SMR-G SMR-H SMR-J
Standard size of shaft 30 40 50 55 65 75 85 100
Alternative size of shaft 40 50 55 65 75 85 100 120
Input shaft keyway 6×3.5×50 6×3.5×59 8x4x63 8x4x70 10x5x70 12x5x90 14×5.5×100 16x6x100

 

 

 

Company Profile
 

l  The largest manufacturer and exporter of CZPT reducers in Asia.

 

l  Established in 1976, we transformed from a county owned factory to private one in 1996. HangZhou SINO-DEUTSCH CZPT TRANSMISSION EQUIPMENT CO.,LTD is CZPT new name since 2001.

 

l  We are the first manufacturer of reducers and gearboxes in CZPT who was given export license since year 1993.

 

l  “Fixedstar” brand gearboxes and reducers are the first owner of CZPT NA TOP BRAND and Most CZPT CZPT Mark for reducers.
 

First to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in CZPT .

   
As a professional manufacturer of worm gearbox and worm gear reducers in CZPT , we mainly produce reduction gearbox,aluminum case CZPT boxes,arc gear cylindrical CZPT boxes, CZPT reducers, in line CZPT cal gearboxes, and cyclo drive reducers, etc. These products feature rational structure, stable performance, and reliable quality, and so on. They are widely used in CZPT , mining, metallurgy, building material, chemical, food, printing, ceramic, paper-making, tobacco, and other industries.

 

 

 

 

We have 600 workers in CZPT factory, which covers 70,000 square meters in HangZhou. We have been making 2,500 units of reducers everyday since 2012. We are proudly exporting 70% of CZPT products to more than 40 countries all over the word. Our CZPT ers come from CZPT , Germany, USA, Canada, Spain, UK, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries in the world. 30% of them are CZPT made for direct manufacturers of other products. 

 

 

 

 

 

 

 

We warmly welcome CZPT ers from other parts of the world to visit us. Seeing is believing. We are very confident that after visiting CZPT facility, you will have confidence on CZPT products. We have the latest automatic equipments and experienced workers to ensure the stable quality and large output. We have the most sophisticated technical and CZPT team to support most demanding requirement on standard and CZPT products.

 

 

 

Looking forward to meeting you in HangZhou, CZPT .

S sales mr Shaft Mounting Reducer Speed Reducer Gear Gearbox The Cheapest Pr price ice in China

Product Description

SMR Reducer Specification
 
 
1 Output Hub

Standard or alternative hubs with metric bores are available to suit international standard shaft diameters.

2 Precision High Quality Gearing 

Computer Designed Helical Gears, Strong Alloy  Materials  for  High  Load  Capacity, Case  Carburized  for  long  life,  Ground Profile(some intermediate pinions are shaved) Crown tooth Profile, In Conformance  with  ISO  13281997,  98% Efficiency  for  Per  Stage,  Smooth  Quiet Operation with Several Teeth in Mesh.

3 Maximum Capacity Housing Design
 
Close  Grain  Cast  Iron  Construction,  Excellent  Vibration  Dampening  &  Shock Resistance Features, Precision Bored and Dowelled to Ensure Accurate In-Line Assembly.

4 Strong Alloy Steel Shafts

Strong Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions, for
Maximum Load and Maximum Torsional Loads. Generous Size Shaft
Keys for Shock Loading and Conform to ISO Standards.

5 Additional Case Lugs Except H and J Gear Case

Eliminates the Need for Critical Tightening of Torque Arm Bolts. Controls Position of
Standard Torque Arm Mounting within Recommended limits.

6 BackStops

Alternative Parts, Antirun Back Device, AreAvailable on all 13:1 and 20:1 Ratio Units and do not recommend for 5:1 Units.

7 Bearings and Oilseals

Bearings are Adequately Proportioned and Conform to ISO Dimension Plan, Readily
Available WorldWide. Oilseals are Double Lipped Garter Spring Type, Ensuring Effective Oil Sealing.

8 Rubberised End Caps

Self Sealing Intermediate Cover Plates, to Standard ISO Housing Dimensions.

9 Torque Arm Assembly

For Easy Adjustment of the Belt.

SIZE : SMR B C D E F G H 

RATIO : 5:1  13:1  20:1 

Contact Me

Welcome to contact William for more details!

 

Model B13/B20 C13/C20 D13/D20 E13/C20 F13/E20 G13/F20 H13/G20 J13/J20
Output(RPM) 10-115 10-110 10-110 10-105 10-105 10-100 10-100 10-100
Power Rating(KW) 0.29-3.11 0.49-4.62 0.82-7.81 1.25-11.55 1.97-17.01 3.11-27.09 4.9-40.7 7.8-60.5
Permissible torque(Nm) 277 468 783 1194 1881 2970 4680 7449

 

Model B5 C5 D5 E5 F5 G5 H5 J5
Output(RPM) 100-400 100-400 100-400 100-400 100-400 100-400 100-400 100-400
Power Rating(KW) 2.68-7.14 4.2-9.66 6.62-15.65 10.29-24.57 15.12-35.91 25.2-59.9 36.2-81.9 62.2-134.2
Permissible torque(Nm) 256 401 632 983 1444 2407 3457 5940

 

 

Dimension(mm) SMR Size
SMR-B SMR-C SMR-D SMR-E SMR-F SMR-G SMR-H SMR-J
Standard size of shaft 30 40 50 55 65 75 85 100
Alternative size of shaft 40 50 55 65 75 85 100 120
Input shaft keyway 6×3.5×50 6×3.5×59 8x4x63 8x4x70 10x5x70 12x5x90 14×5.5×100 16x6x100

 

 

Company Profile

l  The largest manufacturer and exporter of CZPT reducers in Asia.

 

l  Established in 1976, we transformed from a county owned factory to private one in 1996. HangZhou SINO-DEUTSCH CZPT TRANSMISSION EQUIPMENT CO.,LTD is CZPT new name since 2001.

 

l  We are the first manufacturer of reducers and gearboxes in CZPT who was given export license since year 1993.

 

l  “Fixedstar” brand gearboxes and reducers are the first owner of CZPT NA TOP BRAND and Most CZPT CZPT Mark for reducers.

    CZPT to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in CZPT .

   
As a professional manufacturer of worm gearbox and worm gear reducers in CZPT , we mainly produce reduction gearbox,aluminum case CZPT boxes,arc gear cylindrical CZPT boxes, CZPT reducers, in line CZPT cal gearboxes, and cyclo drive reducers, etc. These products feature rational structure, stable performance, and reliable quality, and so on. They are widely used in CZPT , mining, metallurgy, building material, chemical, food, printing, ceramic, paper-making, tobacco, and other industries.

 

 

 

 

We have 600 workers in CZPT factory, which covers 70,000 square meters in HangZhou. We have been making 2,500 units of reducers everyday since 2012. We are proudly exporting 70% of CZPT products to more than 40 countries all over the word. Our CZPT ers come from CZPT , Germany, USA, Canada, Spain, UK, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries in the world. 30% of them are CZPT made for direct manufacturers of other products. 

 

 

 

 

 

 

 

We warmly welcome CZPT ers from other parts of the world to visit us. Seeing is believing. We are very confident that after visiting CZPT facility, you will have confidence on CZPT products. We have the latest automatic equipments and experienced workers to ensure the stable quality and large output. We have the most sophisticated technical and CZPT team to support most demanding requirement on standard and CZPT products.

 

 

 

Looking forward to meeting you in HangZhou, CZPT .

Nmrv 90 Degree Gearb Cheap ox Worm Gear Speed Reducer Transmissio Custom n Price

Product Description

NMRV 90 Degree Gearbox Worm Gear CZPT Reducer Transmission Price

Features:
1. CZPT in weight and CZPT -rusting
2. Smooth in running, can work a CZPT time in dreadful conditions
3. CZPT efficiency, low noise
4. CZPT -looking in appearance, durable in service life, and small in volume

Product photo:

Specification for worm reducer:

Model 571 ~ 150
Power 0.06kw ~ 15kw
Input speed 750rpm ~ 2000rpm
Reduction ratio 1/5 ~ 1/100
Input motor AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo
Output shaft Solid shaft / Hollow shaft / Output flange…
Dimension standard Metric size / Inch size
Material of housing die-cast aluminum / Cast iron / CZPT steel
Accessories Flange / Solid shaft / Torque arm / Cover …

FAQ
Q: Can you make the reducer with CZPT ization?
A: Yes, we can CZPT ize per your request, like flange, shaft, configuration, material, etc.

Q: Do you provide samples?
A: Yes. The sample is CZPT for testing.

Q: What is your MOQ?
A: It is 10pcs for the beginning of CZPT business.

Q: What’s your lead time?
A: Standard products need 5-30days, a bit CZPT er for CZPT ized products.

Q: Do you provide technical support?
A: Yes. Our company have design and development team, we can provide technical support if you
need.

Q: How to ship to us?
A: It is CZPT by air, or by sea, or by train.

Q: How to pay the money?
A: T/T and L/C are preferred, with a different currency, including USD, EUR, RMB, etc.

Q: How can I know the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.

Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.

Q: How shall we contact you?
A: You can send an inquiry directly, and we will respond within 24 hours.