Tag Archives: speed reducer torque

China China High Torque Helical Gear Motor Nmrv Wp Speed Reducer Reductor Worm Gearbox combined worm gearbox

Product Description

China Substantial Torque NMRV Velocity Reducer Reductor Worm Gearbox 

Introduction of worm gearbox

1.     Made of higher-quality aluminum alloy or iron casting housing, gentle in excess weight and non-rusting

2.     Smooth in working and lower in noise, can perform lengthy time in dreadful problems

3.     High in radiating performance

four.     Good-searching in visual appeal, durable in service daily life and little in volume

five.     Suitable for omni-bearing set up

6.    Inch dimension and metric dimensions are both accessible

Firm Overview

 
Background: Greensky is a mechanical model of Greensky Energy Co., Ltd. With more than ten years’
mechanical manufacturing activities, Greensky Energy usually strictly stands on the
principle of Greatest Buyer Pleasure.

Quality: Material Inspection, Manufacturing Management, Completed Goods Test, Pre-dellivery Inspection

MISSION: “When and without end” is our goal to provide buyers in the world. As soon as we do
enterprise with consumer, we will do business permanently.

Market placethirty diverse nations, largely Germany, Austria, Japan, Usa and Middle-East.

Shipping and deliverya hundred% on-time shipping and delivery Confirmed.

ServicesFast reaction in English, German, Japanese and Chinese languages.

OEMTailored orders are welcome at Greensky Electricity.
  

Certificates

Exhibitions

Greensky Item Portfolio: 

FAQ

1 Q: What is actually your MOQ?
   A: 1unit is okay for distinct sorts. 

2 Q: What about your guarantee?
   A: A single year.

three Q: Do you give OEM services with customer-emblem?
   A: Yes, we could do OEM orders, but we mainly concentrate on our possess manufacturer.

4 Q: How about your payment conditions ?
   A: TT, western union and paypal. one hundred% payment in superior for orders considerably less $5,000. thirty% deposit and balance prior to supply for orders above $5,000.

5 Q: How about your packing ?
   A: Carton, Plywood scenario. If you need to have more, we can pack all products with pallet 

Warmly welcome your inquiry and check out our manufacturing facility in China.

US $10-50
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery, Light Duty Machine
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $10-50
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery, Light Duty Machine
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
worm reducer

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
worm reducer

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
worm reducer

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

China China High Torque Helical Gear Motor Nmrv Wp Speed Reducer Reductor Worm Gearbox     combined worm gearboxChina China High Torque Helical Gear Motor Nmrv Wp Speed Reducer Reductor Worm Gearbox     combined worm gearbox
editor by czh 2023-01-28

Gearbox Speed Reducer Output Torque 7449n. M with Torque Arm Gearb wholesaler ox Mot Custom or for Conveyor

Product Description

Product Description

Gearbox speed reducer Output Torque 7449N.m with torque arm gearbox motor for conveyor 

1. Product Characteristics
(1) CZPT alloy steel, hardened, ground on journals, gear seatings and extensions, for maximum load and maximum torsional loads. Generous size shaft keys for shock loading and conform to iso standards.
(2) Standard or alternative hubs with metric bores are CZPT to suit international standard shaft diameters.
(3) CZPT alloy materials for high load capacity, carburizing and quenching, ground profile(some intermediate pinions are shaved) crown tooth profile, 98% efficiency for per stage, smooth quiet operation with several teeth in mesh.
(4) Close grain cast iron construction, excellent vibration dampening & shock resistance features, precision bored and dowelled to ensure accurate in-line assembly.
(5) Eliminates the need for critical tightening of torque arm bolts, controls position of standard torque arm mounting within recommended.
(6) CZPT s are adequately proportioned and conform to iso dimension plan, readily CZPT world-wide. Oil seals are double garter spring type, ensuring effective oil sealing.
(7) Self sealing intermediate cover plates, to standard iso housing dimensions.
(8) Alternative parts, anti-run back device, are CZPT on bothl 13:1 and 20:1 ratio units and do not recommend for 5:1 units.
(9) To adjust the install space location of reducer and the elasticity of belt.

 The models of SMR shafted mounted gearbox: B,C,D,E,F,G,H,J series shaft mounted gearbox 

Detailed Photos

 

Product Parameters

Rated CZPT
 
Gear Arrangement Output CZPT Ratio Back-stop
0.29KW~134KW Helical Hardened Gearbox 10~400r/min I=1/5,1/13,1/20 Alternative parts, Anti-runback device

Packaging & CZPT

 

 

Company Profile

 

 

Our Advantages

 

Our Services:

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ

1.Q:What kinds of gearbox can you produce for us?
A:Main products of CZPT company: UDL series speed variator,RV series CZPT reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series CZPT cal-tooth reducer, more
than one hundred models and thousands of specifications
2.Q:Can you make as per CZPT drawing?
A: Yes, we offer CZPT ized service for CZPT ers.
3.Q:What is your terms of payment ?
A: 30% CZPT payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

 

 If you have any demand for CZPT products please feel free to contact me.

 

Aluminum Housing best Worm Speed Reducer Right Angle Gearbox H supplier igh Torque

Product Description

Aluminum Housing Worm CZPT Reducer Right CZPT le Gearbox CZPT Torque

Features:
1. CZPT in weight and CZPT -rusting
2. Smooth in running, can work a CZPT time in dreadful conditions
3. CZPT efficiency, low noise
4. CZPT -looking in appearance, durable in service life, and small in volume

Product photo:

Specification for CZPT box:

Model 571 ~ 150
Power 0.06kw ~ 15kw
Input speed 750rpm ~ 2000rpm
Reduction ratio 1/5 ~ 1/100
Input motor AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo
Output shaft Solid shaft / Hollow shaft / Output flange…
Dimension standard Metric size / Inch size
Material of housing die-cast aluminum / Cast iron / CZPT steel
Accessories Flange / Solid shaft / Torque arm / Cover …

FAQ
Q: Can you make the gearbox with CZPT ization?
A: Yes, we can CZPT ize per your request, like flange, shaft, configuration, material, etc.

Q: Do you provide samples?
A: Yes. The sample is CZPT for testing.

Q: What is your MOQ?
A: It is 10pcs for the beginning of CZPT business.

Q: What’s your lead time?
A: Standard products need 5-30days, a bit CZPT er for CZPT ized products.

Q: Do you provide technical support?
A: Yes. Our company have design and development team, we can provide technical support if you
need.

Q: How to ship to us?
A: It is CZPT by air, or by sea, or by train.

Q: How to pay the money?
A: T/T and L/C are preferred, with a different currency, including USD, EUR, RMB, etc.

Q: How can I know the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.

Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.

Q: How shall we contact you?
A: You can send an inquiry directly, and we will respond within 24 hours.